1971-74 AMC AMX JAVELIN SST 401 4V AIR CLEANER
OEM 1971-74 AMC Javelin AMX Hornet Gremlin X Air Cleaner. This assembly has been refinished to represent the factory appearance as produced for the late 71-74 models. It features the later introduction of the thermal air inlet to late 1971 with the new pre-heater provisions. The base is in good condition and features the front breather tube. The flange is 5 1/8" inch and accomodates factory 4 barrel carburetors (Autolite 4300 models) as well as modern iterations of Edelbrock AFB and select Holley carburetors. The interior retains the correct air temperature sensor (ATS) secured by factory push nuts and comes with new vacuum lines to connect to both the snorkel and carburetor vacuum inlet. It is finished off with a reproduction AMC licensed 401 Four Barrel High Compression air cleaner decal and correct air cleaner service decal. A "Made in Canada" stamp has been added as a nice touch of authenticity.
The lid is in good condition with minor surface anomalies around the rim and comes with an original lid seal. The assembly is completed with a period correct wing nut and new heavy duty air filter.
This assembly was available starting mid-71, as Federal emissions and drive-by noise reverted the performance air cleaners to a this single snorkel with pre-heating emissions requirements. It will work with the Cowl Induction fresh air systems designed for the AMX/Javelin Go-Pak optioned cars as well.
This is a nice assembly that will enhance your restoration. Best of all, it is a genuine AMC part!
This assembly is correct for the following 1971-74 360 / 401 4V models:
Javelin AMX SST, Hornet, Gremlin X (a change of decal is required for the 360 models - not included).
It will fit a variety of AMC cars from 1968-1974 as well, but is correct for the 71-74 models.
The assembly will fit factory 4 barrel Autolite carburetors with a 5 1/8" diameter flange, as well as Holley (non-double pumpers), Carter, and Edelbrock variations without electric choke (some adjustment to the carburetor alignment tang may be required). If you have modified your carburetor or intake manifold, please inquire first prior to bidding to ensure fitment is correct. Return requests for non-fitment will not be honored.
CUSTOMER SERVICE, WARRANTY, & RETURNS
The assembly will ship within one day (usually the day of payment) with shipping/tracking information provided.
This assembly is guaranteed to match the item description – customers have up to 14 days to return the assembly after receipt if it is not as described.
Assemblies must be returned in the original packing – customers are responsible for return shipping charges. A refund will be issued upon receipt of the inspected assembly. Returns for non-fitment will not be honored – please ask questions first.
In the event of shipping damage, customers must save all packaging and send 5 digital pictures so Musclecar Air Cleaners can initiate a shipping damage claim.
WE SHIP WITH
Typical shipping costs:
Canada / Hawaii / Alaska $40 +/-
Scandinavia $65 or less
Australia $95 or less